It's Sunday and time for a new challenge over at The Paper Players! It's the turn of the super-talented Claire to host our challenge this week and she has a timely theme for you to play along with:

With only a couple of weeks to go until Father's Day, today's challenge is a great opportunity for you to get your cards made (and posted if necessary!) in a timely manner. For my card this week I debated with myself what stamps to use: old or new! In the end I ended up making not one but 3 cards, each using a different set. I will be sharing them all over the next three days so if you're in need of masculine inspiration be sure to check back for three very different cards, each of which would work for both Father's Day or a male/Dad's birthday.

For today's card I used this week's sketch over at the Global Design Project and decided to go with one of my favourite existing masculine sets, Guy Greetings, along with some new product - copper embossing powder. Take a look:

Here's the low-down on today's card:

Add Shine With Copper - Heat embossing adds a 'wow' to any project and the new copper embossing powder is no exception. I stamped my anchors from the 'Guy Greetings' stamp set in Versamark onto a panel of Whisper White and heat embossed them in copper. Check out the lovely sheen that you get when the light bounces off it on my card above! I chose Bermuda Bay for the base and top split layer above my recessed anchor panel; it looks great with the copper and reminds me of the sea, so seemed appropriate for today's card. 

A Multi-Purpose Guy Greeting - I saved my 'Happy Father's Day' sentiment for the inside of my card and chose the anchor one for the front. It ties in with my visuals of course, but would also make this card a multi-purpose masculine card that could be used for other occasions too.

A Layered Label And Embellished Anchor - I used a layered label from the Tags & Labels Framelits set for my sentiment, modifying the mat as I wanted it to have a thinner border than the standard framelit size. This was easy to do: I just cut a standard sized one, then cut it again to remove a slice off two of the four sides. To finish I embossed another anchor in copper, then fussy cut it by hand, removing the rope pieces. I then took some thick Bermuda Bay baker's twine and wrapped it around the anchor where the embossed rope would have been and secured it in place with glue dots. You can see it in more detail in the thumbnail at the top of today's post.

Here is the visual summary of the key products used on today's project for you to pin for easy reference:

You can see all of my 'How To' summaries on my 'How To - Tips and Techniques' Pinterest board in case you've missed any. 

Before you reach for your ink and papers, check out what our amazing team has created to inspire you this week:

I look forward to seeing your masculine creations in our gallery this week. The weather hasn't been great here this week, however yesterday was a little warmer and today is forecast the same, so I'm looking forward to a BBQ lunch in the garden - doesn't food always taste better if eaten in the open air? I think so! Then I'm hoping to spend some time in the afternoon preparing for my Annual Catalogue Open House on Friday later this week. I hope you enjoy your Sunday too.

I'll be back tomorrow with another masculine project; until then, happy stampin'!

Stampin' Up! Supplies Used: 

Guy Greetings Photopolymer Stamp Set	Tags & Labels Framelits Dies	Copper Stampin' Emboss Powder	Bermuda Bay Thick Baker’S Twine	Bermuda Bay A4 Cardstock
Bermuda Bay Classic Stampin' Pad	Whisper White A4 Cardstock	Embossing Buddy	Versamark Pad	Heat Tool (Uk)

Yay it's Sunday and time for a new challenge over at The Paper Players - and this week I'm the hostess! With Father's Day approaching, I thought that masculine cards would make a great theme this week and it would at least encourage me to be organised!

I have lots of photos to share with you today, as I made not just one but two projects: a fun card using the mini treat bag thinlits and a matching gift bag using my new Gift Bag Punch Board - oh how I love this!

So first to my card: I've seen a few of these fun cards on Pinterest using the Mini Treat Bag Thinlits Die to create a fancy shirt with a sliding insert (one of my favourites is this one by Julie Kettlewell) and have been wanting to have a go at creating my own version for a while. Here it is: 

I have used the now retired Adventure Bound DSP for my card - this paper is just so fabulous for masculine cards and I hope you all stocked up before it retired! The Mini Treat Bag Thinlits are great for making simple slider cards as well as treat bags; I added silver buttons, a pocket punched with my hexagon punch and with a snippet of Island Indigo chevron ribbon in for a handkerchief. For my insert, I cut it taller than my pocket, then snipped in a third of the way each side to create my turned down collar and added my bow tie. The picture below shows the insert with my stamped sentiment from the 'Guy Greetings' stamp set and a pair of shoes to finish off this dapper outfit:

Pleased as I was with this cute little card, I couldn't stop there; I had to create a matching gift bag using my new Gift Bag Punch Board. I think this is going to be one of my new favourite tools - it is so easy to use and offers so many creative possibilities that go beyond the constraints of the board. Here is my bag:

I made my bag using the 'L' measurements on the board and used a sheet of Whisper White cardstock measuring 9 1/2" x 12". Once I'd punched the bottom according to the board instructions, I flipped it around and did the same on the other end, cutting away all except the long flap on the back of the bag, which I then also punched in the middle to create my collar. I then used the collar as the close mechanism for my bag, by tucking it underneath the bow tie - the photo below of the open bag illustrates that more clearly:

I then added two pieces of DSP with co-ordinating lapels and a large silver button threaded with a piece of white jute ribbon trim to finish my bag. Here are both items together:

I'm really pleased with this project duo; the gift bag is large enough for a couple of pairs of socks, some toiletries, a sweet treat (or two!) - pretty much anything that might be on a Dad's wish list. I hope you like them too and they inspire you to create some fun masculine projects this week! Before you reach for your ink and papers, check out what our amazing team has created to inspire you this week, including our three new guest designers:

I look forward to seeing your masculine creations in the gallery this week. I'm off to finish preparations for this week's technique classes and tackle my mountain of ironing. How does the saying go - no rest for the wicked?!

Back tomorrow with another project; until then, happy stampin'!

Stampin' Up! Supplies Used:

Gift Bag Punch Board	Mini Treat Bag Thinlits Dies	Guy Greetings Photopolymer Stamp Set	Bow Builder Punch	Island Indigo Classic Stampin' Pad
Island Indigo A4 Cardstock	Whisper White A4 Cardstock	Whisper White 12" X 12" Cardstock	Big Shot	Magnetic Platform
Silver Basic Metal Buttons	White 1-1/4" (3.2 Cm) Jute Ribbon

It's been all busy here at the James' today: I have had the first of my Stampin' Up! Annual Catalogue Launch Open House sessions and enjoyed welcoming lots of guests to share in the delights of the new catalogue. More on that later in the week, meanwhile for all you lovely blog readers I have a card that I made for a few challenges today: CAS(E) This Sketch, CAS-ual Fridays who are calling for use of tan, white and one bright colour and Less Is More, where they are looking for two legs or four:

So with all that in mind and Fathers Day just around the corner, here is today's card:

I thought the sketch was an interesting one and whilst my choice of two legs might not seem altogether adventurous, this is the only stamp in my Guy Greetings stamp set that I haven't inked up to date since as much as I love the set, I'm not sure about this fella! I did all my stamping in Soft Suede, stamping the man again on Tangerine Tango cardstock and fussy cutting out his trousers and paper piecing them onto my card base. The arrows I used with my sentiment are from an old photopolymer set (can't remember the name) and I popped the 'DAD' onto a small punched oval over some Tangerine Tango baker's twine for a little more added colour and emphasis. 

That's all from me for today; I'll be back tomorrow with a card for this week's new challenge over at Create With Connie and Mary using a brand new stamp set, so do pop back as you're not going to want to miss it. until then, happy stampin'!

Stampin' Up! Supplies Used:

Guy Greetings Photopolymer Stamp Set

Tangerine Tango A4 Cardstock

Soft Suede Classic Stampin' Pad

Soft Suede A4 Cardstock

Whisper White A4 Cardstock

It's Sunday and time for a new challenge over at The Paper Players. There were some great takes on Anne's sketch last week and today we are kicking off with a challenge from the talented Sandy, who has chosen a great theme for you to play along with this week:

I used this week's layout over at Mojo Monday as the basis for my card (although I didn't go tall and skinny!). As soon as I knew Sandy's theme this week, I knew immediately that I wanted to do something using the vintage car in the 'Guy Greetings' stamp set. Here's what I came up with:

I decided the layout was perfect for showcasing some of the fabulous masculine patterned papers in the 'Adventure Bound' DSP stack too and used the plaid paper as the inspiration for my colour scheme. The base and mat layers are Smoky Slate, with a layer of Island indigo in between along with a band in the same colour across the front of the card, which I tied with a piece of thread split from the white jute ribbon in the current Occasions catalogue. I then used my piece of DSP for the vertical panel and stamped my car in Island Indigo onto a 2" punched circle of Whisper White, with the sentiment stamped in the same colour onto a banner of Smoky Slate, which I then laid over the top.

A great masculine card that could be paired with any of the other sentiments in the same stamp set for a special husband, dad or grandad, and would be suitable for a birthday or Father's Day alike. 

So before you reach for your paper and inks, check out what our amazing team has created to inspire you this week:

I look forward to seeing how many different modes of transport get into the gallery this week. I'm off to enjoy a nice long Bank Holiday weekend here in the UK - let's hope the sun shines!

Back tomorrow with another project; until then, happy stampin'!

Stampin' Up! Supplies Used:

Guy Greetings Photopolymer Stamp Set	Adventure Bound Designer Series Paper Stack	Card Stock A4 Smoky Slate	Island Indigo Classic Stampin' Pad	Island Indigo A4 Card Stock
Whisper White A4 Card Stock	2" Circle Punch	White 1-1/4" (3.2 Cm) Jute Ribbon

So today I'm sharing a card that I made for this week's Pals Paper Arts challenge, where they have a great sketch for us this week:

The minute I saw this sketch, I knew exactly what I wanted to do with it. In my quest to use up some of my retiring DSP, I knew that the anchor stamp in the 'Guy Greetings' stamp set would work perfectly with some of the papers in the Maritime DSP set, specifically the navy rope and red anchor paper. I decided upon a 5 1/2" square card and I set to work, although my card didn't quite work out as I initially planned. Let me show you my card and then I'll share the story:

My initial intention had been to use the rope paper as you see above, but flip it for the second section and use the red anchor pattern on the reverse. But after much flipping, trimming and trading of circle mounts for my anchor, I ended up unable to make the patterns work together. They just didn't look right to me and the sentiment banner I had cut interfered with my anchor too much, so I decided to ditch the red and use a plain panel of Night of Navy and heat emboss my sentiment onto it directly in white, leaving my embossed anchor uncluttered and the rope pattern beautifully showcased. As I stood back to admire my handiwork and did a check back to the sketch, I realised that my card is a virtual case of Brian King's Design Team card for the challenge which you can see here - oh dear! This wasn't conscious, although I've shared my love of Brian's work on my blog here before and I am so drawn to his clean and uncluttered style. So I'm hoping he will take it as a compliment and the Pals will allow my linkup as an example of a card truly inspired by a member of their DT this week!

Back tomorrow with a new set of Wednesday Weekly Deals and another project. Until then, happy stampin'!

Stampin' Up! Supplies Used:

Guy Greetings Photopolymer Stamp Set	Versamark Pad	Embossing Buddy	Heat Tool - Uk Plug	White Stampin' Emboss Powder
Whisper White A4 Card Stock	Night Of Navy A4 Card Stock	Big Shot Die-Cut Machine	Big Shot Magnetic Platform	Circles Collection Framelits Dies

I have another monochromatic masculine card for you today - I still had the papers and stamp set out on my desk from yesterday's card and couldn't resist creating another sample using this week's sketch over at As You See It:

This is a great sketch for combining patterns or images and I had a few ideas as to how I was going to use it so don't be surprised if you see me use it again. For today though, it's all about the shoes - take a look at my card and you'll see what I mean:

I used Very Vanilla as my base and this time a piece of checked Typeset paper on black for my panels, then I narrowed the four square elements of the sketch so that I could fit in four pairs of shoes - you can never have too many pairs of shoes, right?! A stapled banner sentiment, some wide chevron ribbon and some funky shoe laces to highlight one of the pairs of shoes and done!

Making this card reminded me of the Robert Redford/Michelle Pfeiffer movie "Up Close & Personal" - such a great movie, but the scene where she sees his shoes with the red laces at the end ... if you haven't seen it, I won't spoil it for you, but if you're an old-fashioned romantic I can highly recommend it - just don't forget the tissues!

Back tomorrow with another project; until then, happy stampin'!

Stampin' Up! Supplies Used:

Guy Greetings Photopolymer Stamp Set	Very Vanilla A4 Card Stock	Tuxedo Black Memento Ink Pad	Typeset Specialty Designer Series Paper	Basic Black A4 Card Stock
Basic Black Baker's Twine	Basic Black 3/4" Chevron Ribbon

I'm here today to share my card for this week's challenge over at Create With Connie and Mary where they have a rather interesting sketch to play along with this week:

I've been playing with my new 'Guy Greetings' stamp set this week, in preparation for my next stamp-a-stack class which is featuring masculine cards and I decided that this sketch would work perfectly with a trio of hats - take a look at my card to see what I mean:

I went for a monochromatic look for my card with a Very Vanilla base and a piece of striped Typeset paper, set beneath another layer of Very Vanilla cut at an angle. I masked the hat stamp and inked three of the six hats and stamped them above a piece of black cardstock cut at an angle, then stamped my greeting on the Vanilla base panel. I finished my black strip with a trio of Very Vanilla candy dots. Clean and simple and I like it! 

Back tomorrow with another project; until then, happy stampin'!

Stampin' Up! Supplies Used:

Guy Greetings Photopolymer Stamp Set	Very Vanilla A4 Card Stock	Tuxedo Black Memento Ink Pad	Typeset Specialty Designer Series Paper	Basic Black A4 Card Stock
Neutrals Candy Dots